LAN板とソレ以外の日々

scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.36
        
        aic7890/91: Ultra2 Wide Channel A, SCSI Id=7, 32/253 SCBs

blk: queue df7eeb74, I/O limit 4095Mb (mask 0xffffffff)
(scsi0:A:0): 40.000MB/s transfers (20.000MHz, offset 15, 16bit)
  Vendor: IBM       Model: DCHS04U           Rev: 6363
  Type:   Direct-Access                      ANSI SCSI revision: 02
blk: queue de7dfe94, I/O limit 4095Mb (mask 0xffffffff)
(scsi0:A:1): 40.000MB/s transfers (20.000MHz, offset 15, 16bit)
  Vendor: IBM       Model: DCHS04U           Rev: 6363
  Type:   Direct-Access                      ANSI SCSI revision: 02
blk: queue df7ee974, I/O limit 4095Mb (mask 0xffffffff)
(scsi0:A:2): 40.000MB/s transfers (20.000MHz, offset 15, 16bit)
  Vendor: IBM       Model: DCHS04U           Rev: 6363
  Type:   Direct-Access                      ANSI SCSI revision: 02
blk: queue df7eea74, I/O limit 4095Mb (mask 0xffffffff)
(scsi0:A:4): 20.000MB/s transfers (10.000MHz, offset 15, 16bit)
  Vendor: BNCHMARK  Model: DLT1              Rev: 391B
  Type:   Sequential-Access                  ANSI SCSI revision: 02
blk: queue da51a7b4, I/O limit 4095Mb (mask 0xffffffff)
scsi0:A:0:0: Tagged Queuing enabled.  Depth 253
scsi0:A:1:0: Tagged Queuing enabled.  Depth 253
scsi0:A:2:0: Tagged Queuing enabled.  Depth 253

[root@DURON-PC mtx-1.2.17rel]# mt -f /dev/nst0 status
SCSI 2 tape drive:
File number=-1, block number=-1, partition=0.
Tape block size 0 bytes. Density code 0x1a (DLT 20GB).
Soft error count since last status=0
General status bits on (5010000):
 WR_PROT ONLINE IM_REP_EN

[root@DURON-PC mtx-1.2.17rel]# mt -f /dev/nst0 status
SCSI 2 tape drive:
File number=0, block number=0, partition=0.
Tape block size 0 bytes. Density code 0x40 (DLT1 40 GB, or Ultrium).
Soft error count since last status=0
General status bits on (41010000):
 BOT ONLINE IM_REP_EN