その後
ide-siimage-seagate.patchを見つけたので適用ヽ(´ー｀)ノ
[root@DURON-PC root]# hdparm -d1c1u1m16 -X70 -ftT /dev/hde
/dev/hde:
setting 32-bit IO_support flag to 1
setting multcount to 16
setting unmaskirq to 1 (on)
setting using_dma to 1 (on)
setting xfermode to 70 (UltraDMA mode6)
multcount = 16 (on)
IO_support = 1 (32-bit)
unmaskirq = 1 (on)
using_dma = 1 (on)
Timing buffer-cache reads: 128 MB in 0.60 seconds =213.33 MB/sec
Timing buffered disk reads: 64 MB in 1.13 seconds = 56.64 MB/sec
大勝利ヽ(´ー｀)ノ歓喜
[root@DURON-PC root]# hdparm -ftT /dev/md0
/dev/md0:
Timing buffer-cache reads: 128 MB in 0.57 seconds =224.56 MB/sec
Timing buffered disk reads: 64 MB in 0.94 seconds = 68.09 MB/sec
まあ、限界ポイかもわからんね。ということで、本体のIDEとで RAID0
[root@DURON-PC root]# hdparm -ftT /dev/md0
/dev/md0:
Timing buffer-cache reads: 128 MB in 0.60 seconds =213.33 MB/sec
Timing buffered disk reads: 64 MB in 0.63 seconds =101.59 MB/sec
嘘みたいな数字(;´Д`)ワラタ
Posted by minemaz at 2004年12月04日 23:36